SG Series bottle injection blender

SG Series bottle injection blender
The SG series bottle injection blender can be used to some cases. It is to say where centrifugal pumps are used to transfer liquid, where such mixer can be used. The SG series bottle jet blender is an ideal mixing equipment to be used to container, storage tank and neutralization tank for oil mixing, acid-base neutralization and reaction.
The company has applied SG series bottle jet blender as its patented product.

■ Denotation of product types

■ Product specifications
（1）Bottle jet blender with Thread connection

Model\ Size	SG-1-R	SG-2-R	SG-3-R	SG-4-R	SG-5-R	SG-6-R	SG-7-R
d	Rc3/4	Rc1	Rc1 1/2	Rc1 1/2	Rc2	Rc3	Rc4
L	170	220	265	345	400	520	610
h	20	25	24	24	30	33	40
D	52/50	60/60	75/70	85/80	100/90	125/120	160/150

Note: Figures below the slant line refer to the size of Stainless steel blender or plastic blender; figures above the slant line refer to the size of carbon steel blender

with thread connection

(2) Bottle injection blender with flange connection

Model\ Size	SG-1-F	SG-2-F	SG-3-F	SG-4-F	SG-5-F	SG-6-F	SG-7-F
d	20	25	40	40	50	80	100
L	205/170	255/220	300/265	380/345	440/400	570/495	660/610
D	52/50	60/60	75/70	85/80	100/90	125/120	160/150

Notes:
a. If there is no special requirement, flange standard refers to HG20593- 97 PN 1.0.
b. Figures below the slant line refer to the size of Stainless steel blender or plastic mixer; figures above the slant line refer to the size of carbon steel blender.

Notes for order
The model number and the size number of SG series bottle injection blender are well matched. For general technological process, ideal mixers can be found based on the power profile mentioned below:
Example:
Assuming: Bottle diameter: 3600mm; bottle height: 8m; pump volume: 10m3/h; blender pressure: 4kg/cm2; revolving times: 0.5h/each time
The model number of the bottle injection blender SG-4 can be derived according to the power profile.